Day: October 22, 2020

How to Align Garage Door Tracks

Garage doors are very sensitive, and different factors are the reason for the garage door will sometimes jam or have trouble open or closing. Maybe someone bumped into the garage door accidentally, or it is a part has started to corrode over time and a whole lot more. That is why aligning your garage door tracks is a must once you spotted the issue. The track of the garage door is an important part to open and close the garage door. The track is placed on each side of the garage door, or gate. This track will be used for swiping the door up or down, and push or pull the door to get you in or out of the door. If the track is not working properly you cannot able to enter or out from the door. This will help to move the door up or down, or sliding front or back smoothly. If anyone of the cables is Brocken it will become a problem. Once the track will troubleshoot the problem means you should install the new one by the expert of the track exchanger or you can fix this problem. Do not worry, it is the simplest issue and easy to rectify it with three to four hours. Doing the procedure is pretty easy to fix the garage door track issue, take a look at the site here. As long as you have the right tools and required equipment, then you are ready for fixing the problem of the garage door track.

Step to align the garage door tracks made simple

Step to align the garage door tracks made simple

The first step to align the garage door track in the right place is to loosen the track for a while. There are plenty of screws bolted around the track to secure and fixing the garage door in the frame. If it slips or loosens means it will fall at any time. In other cases, its tight means, the garage door not working properly. Make sure that they are loose enough before proceeding to the next step to align the garage door. The next step is adjusting the garage door track. Adjust the garage door track position using a rubber which is inside the track. The track will be divided into two lines to make a grip between the track and garage doors. You can also use the tool to ensure an optimal position and prevent further errors. Once you align the track of the garage door, make sure it is fixed right place.

The third step is tightening the screws to secure the garage door in the right place. Once done the aligning process only you should tighten the screws again, and then you are done the process of aligning the track of the garage door. Repeat these same steps for the other garage door tracks when it is needed. As you can see adjusting your garage door track is an easy way that is followed by these three simple steps. There is no need to use sophisticated tools or hire a professional to fix the garage door tracks.